Cartec Diamond Cut 3000 is a compound with exceptional deep cutting, making it the perfect choice for hard and scratch-resistant paints. It quickly and effortlessly removes deep scratches, sanding marks (P1200 and upwards), spray mist, orange peel, dust, sags and runners. Additionally, it is highly effective on newly painted surfaces.
Product benefits:
- Fast and deep cutting
- Time-saving
- Easy to buff off
- Provides instant high gloss
- Free of silicones, ammonia and fillers
- Highly effective on fresh paintwork
Application:
Cartec Diamond Cut 3000 is designed for removing sanding marks (P1200 and finer), deep scratches, paint haze, orange peel, dust inclusions, runs, and paint drips.
Instructions for use:
1.Define the working area – it should be shoulder-width and cover a surface approximately six times the diameter of the polishing pad.
2.Apply 3 pea-sized drops (for ⌀125 mm) of Cartec Diamond Cut 3000 onto the polishing pad.
3a.Rotary polisher: Use the green Cartec pad for rotary machines (RF2310 for ⌀125 mm). Spread the product at the lowest speed, then increase the speed to 1200–1500 RPM.
3b.Dual Action polisher: Use the green Cartec pad for DA machines (RF2316 for ⌀125 mm). Spread the product at the lowest speed, then increase the speed to 3500–4800 OPM.
4.Work in sections using even pressure. Continue polishing until scratches are fully removed.
5.Thoroughly clean the surface using a Cartec Green microfiber cloth (RF2203C) to remove any polish residue.
Tips & Tricks:
Use Cartec Panel Spray (REFLPS) to completely degrease the surface, remove remaining polish residue and review the actual condition of the paintwork.
When using a rotary polishing machine, avoid polishing in one spot for too long to prevent overheating of the paint.
Use a 3000-grit foam disc in the fine-grade abrasives process to reduce polishing time